The return of ex-president: Krypto-Kekkonen

Visual cryptogrphy hiding piece of history

Visual cryptography that hides a piece of history

Due to recent events in world politics, I decided to take a look back and make an implementation of 3D-printed visual cryptography. There were some challenges as original model was designed for printing onto overhead transparencies, which are pretty much obsolete tech today.

Continue reading

Temperature-humidity-light meter – for kids, you know.

Thermo-hygro-light-o-thingie

Thermo-hygro-light’o-thingie

In the series of don’t-we-already-have-more-than-enough-of-these-gizmos: Today I made a simple power conscious cloud-connected weather sensor. While the design itself is trivial, it seems that ready-made devices available seriously lack in connection options and customisability – while doing something like this is a simple matter of programming™.

Continue reading

My Air Purifier is in the Internet – should I be worried?

Typical IoT system level components

Typical IoT system level components

It is 2016 and everything is connected to internet in a way or another, what’s the big fuzz about privacy and security of these little devices? After all we have made consumer gadgets since ages, and one in a while malfunction or vulnerability gets discovered and shotly it gets fixed, right?

By looking closely at some of my connected devices, I found interesting stuff that has gone largely unnoticed. And more interesting is to come, for reasons I am about to explain.

Continue reading

Smart’ifying a wall clock with – time to wake up! [part 2]

Panic, get up, or stay in bed and continue sleep?

Panic? Get up? Or stay in bed and continue sleep?

Ok, so sandwiching a clock on clock wasn’t the greatest idea there – what would be the next marginally smarter idea? Adding wake up alarm! In the vast sea of alarm implementations there isn’t much to be celebrated in terms of unique and clever design. So going for the context around it: How about hose dark moments in the middle of night when one suddenly wakes up wondering if the alarm goes off at the next moment.

Continue reading

Turning a wall clock to smart one, what does it take? – Part 1

 

Wall clock with electronics in back. Below motion sensor without casing.

Ikea wall clock with electronics installed to backside. Below motion sensor without casing.

It is 2016 and we are about to have flying cars soon, it would about the time to start turning old non-smart objects to smart ones. How would one make a wall clock smarter, say by an epsilon?

For long I have played with the idea on turning the most mundane objects into something completely different – so when I saw  ¢ 50 Ikea RUSCH wall clock, made from semi-transparent plastic I knew it would be an opportunity to add some oddball functionality there. Ikea tuning it is, lets start putting the steroids in.

Continue reading

3D-printed housing for an electronics project

Anyone who has made electronics projects knows that the housing part is painful. I have a quite ordinary setup for an electronics project: small squarish housing needed for a PCB with few external connectors, couple buttons, and one optional insert for PIR sensor. My primary problem is how to make this look good and get it quickly.

Small button caps, SLA print.

Small button caps, SLA print.

Continue reading